VARI❋LITE® - VIRTUOSO™ / VIRTUOSO™ DX CONSOLE USER’S MANUAL
40 16-Apr-02 02.9651.0001B
Patching VARI
❋
LITE Series 300 Luminaires
Use this procedure to patch VARI❋LITE interface devices, Series 300 luminaires, and
lamp power supplies.
Note: This patch procedure does not work for VL2000™, VL2™ or VL4™
luminaires. Series 200™ luminaires must be patched using the DMX procedure.
Refer to “Patching DMX/Conventional Fixtures” on page 35.
Step 1. At Plan View window icon bar, select a VARI❋LITE luminaire icon as
required.
Step 2. At desired location on plan view, click to place icon. Luminaire Patch
window will open.
* Refer to “2D/3D Mode Guidelines” on page 47 for more information.
Step 3. At luminaire Patch window, do the following:
a. At Device pop-up menu, specify luminaire profile type (VL5™,
VL5Arc™, VL5B™, VL6™, VL7™, etc.).
b. At Address column, enter appropriate channel, thumbwheel, and bulb
thumbwheel information. (Thumbwheel addresses can be obtained from
the System Configuration window if necessary.)
c. Specify lamp source and preheat level as required. (Preheat values of 0
to 9 percent may be assigned for incandescent luminaires).
VL5 Icon
VL6 Icon
VL7 Icon
Select
Total Channels
Object
VLM Icon
Displays as 2D or 3D
configuration in window*
Channel
Number
Comments to this Manuals