Vari Lite Virtuoso DX User Manual download pdf (Page 183)

TIMING/FILTER DISPLAYS : TIMING MODE

02.9651.0001 C 23-Sep-02 157

Use the examples below to send all values in the Timing screen or individual values to

luminaires as required.

Set an entire timing scheme:

Step 1. At screen/window, select a parameter(s).

Step 2. At keypad, press [Time], [Delay], or [Speed] as required, followed by time

value. Time value will appear in cells of selected parameters.

Step 3. Repeat steps 1 and 2, selecting different parameters and entering new values.

Step 4. Select channels as required.

Step 5. Press Timing button to send all values.

Send a timing value directly to a selected parameter:

Step 1. Select channels as required.

Step 2. At screen/window, select a parameter.

Step 3. At keypad, press [Time], [Delay], or [Speed] as required, followed by time

value and then [Enter]. Time value will appear in cell of selected parameter

at screen/window and be sent directly to selected channels.

Clear Timing screen of all values:

If timing values are cleared (as opposed to zero), existing timing information for that

parameter in the luminaire will be left intact upon pressing .

• Press Timing [Clear] (located below touch screen).

Clear the value of any individual parameter:

Step 1. Select channels as required.

Step 2. At screen/window, select a parameter.

Step 3. At keypad, press [Time] [Enter].

An example of setting edge and focus timing:

Step 1. Select channels as required.

Step 2. [Time] [.] [5] [Enter] - sets timing value for edge (edge,

frost, effect, prism), and focus (pan, tilt) to one-half second.

An example of setting focus delay time:

Step 1. Select channels as required.

Step 2. [Time] [1] [.] [0] [Delay] [.] [5] [Enter] - sets the timing values for

focus (pan, tilt) to 1 second with a one-half second delay.

Enter

Edge Focus

Focus

1 2 ... 178 179 180 181 182 183 184 185 186 187 188 ... 400 401

No comments

Vari Lite Virtuoso DX User Manual Page 183